名盾保险柜 / 2015-08-08
Attention：the master key and external power must keep outside！
The Original Set
There are two set of passwords. The first one is Personal password;(factory setting:1234);another one is Master password;(factory setting:123456).
Open the safe
1.Use main key and master key together to open the safe or fill AAA batteries into the external battery case.
2.Inset the plug of external battery case into the inlet on the panel.
3.Press "#1234#" ,indicator will show"Open",Turn the main key and handle （clockwise） to open the safe.Pull the door open.
4.After door opening,take out the batteries from the external battery case and put them into built-in battery case on the back of the door.
Caution：Please repeat step 3 and 4 several times before routine use of the safe box.
1.The indicator will show "Error"and turns to standby mood if the wrong password were pressed.The sound of alarm may continue for one minute when continuous three times wrong try.
2.Button "*"can clear the digits.
3.Before press the password,press the button "*" can turn to the hidden password function.
Change the Personal password
Open the door and press the change code button, the indicator will show "-----",After press 1-8 new password,press"#"to confirm.It means change the password succeed.
Change the Master password
Press the "#"to make the indicator show "-----",then press "0" 2 times and press the change password button,then the indicator shows"-----"again. Press 1-8 new password and "#"to confirm. Now, the indicator shows "INTO"and the change succeed.
1.When in the standby mood, pressing button "0"and the indicator shows "BELL ON". The safe cones into the alert status.
2.The alarm system will alert when the safe is impacted or moved forcefully. Press the correct personal code can stop the alarm and take off the alert status. If you don't enter the correct personal codes, the sound of alarm may continue for 1 minute, but the alert status won't take off.
The date and time setting
1.In the standby mood,press button"*"and the indicator change into changing mood.
2.Press 0-9 numbers indirectly to change the date and time.
3.Button "*"is to correct the wrong enter.
Emergency Key Opening
If can't open the safe (personal password lost, electronic part damaged,etc.) emergency can used master key to open the safe box. Insert the master key in rightside keyhole and turn the master key anti-clockwise , hold it,then turn the main key and handle clockwise.
www.firesun-inc.com 020-81576546 13632428380 Guangzhou Safe-best safe Ltd.